Views: 0 Author: Site Editor Publish Time: 2026-11-16 Origin: Site
The AG2 battery is a widely used alkaline button cell designed for compact, low-power electronic devices. Also known as LR726, LR59 and 396A, this tiny 1.5V coin battery delivers stable, long-lasting power for precision small electronics. It is one of the mainstream miniature alkaline batteries in the watch and sensor industry.
Basic Specifications
Chemistry: Alkaline Manganese Dioxide
Nominal Voltage: 1.5 V
Diameter: 7.9 mm
Height: 2.6 mm
Typical Capacity: Around 25 mAh
Operating Temperature: 0°C ~ 60°C
Shelf Life: Up to 3 years under proper storage conditions
Terminal Type: Button cell, positive on top, negative on the bottom
Alkaline AG2 batteries feature low self-discharge, stable voltage output and affordable cost compared with silver oxide equivalents. Note that silver oxide SR726SW (397) shares the same size but runs at 1.55V; they are not fully interchangeable for high-precision watches.
Cross Reference / Equivalent Part Numbers
Many manufacturers use different naming rules for the same physical AG2 cell. You can refer to this cross list:
AG2 = LR726 = LR59 = 396A
Compatible replacement (same size, alkaline type): LR726, 396A
Do NOT confuse with: SR726SW (397, silver oxide, 1.55V)
When replacing batteries for watches or sensors, always check the original marking on th e old battery. If the device requires silver oxide 1.55V power, an alkaline AG2 may cause inaccurate time or function failure.
Main Application Scenarios
Thanks to its ultra-small dimension and low drain characteristic, AG2 (LR726) is commonly fitted into:
Analog quartz watches, ladies’ thin watches
Small electronic thermometers
Tiny laser pointers
Mini calculators
Hearing accessories (non-medical grade)
Electronic toys & keychain lights
Small wearable sensors and fitness trackers
It fits devices that only draw a small continuous current and do not need heavy pulse power. AG2 is not suitable for high-power products such as digital cameras and high-brightness flashlights.
Usage & Storage Tips
1. Keep the battery surface dry and clean before installation. Do not touch both positive and negative terminals at the same time to avoid short circuit.
2. Install with correct polarity. Reversed installation will stop the device and may cause leakage.
3. Store in cool, dry places away from direct sunlight and high humidity.
4. Do not charge, disassemble, heat or throw the battery into fire.
5. Remove the battery if the product will be unused for a long time to prevent electrolyte leakage which may damage the circuit board.
6. Keep away from children. If swallowed, seek medical help immediately.
Frequently Asked Questions
Q: Can AG2 replace SR726SW (397)?
A: They have identical outer size, but different voltage and chemistry. AG2 alkaline is 1.5V while SR726SW silver oxide is 1.55V. For most basic quartz watches, it may work temporarily, but we do not recommend permanent substitution for precision timepieces.
Q: How long will an AG2 battery last in a watch?
A: It depends on watch movement design. Normally, an AG2 battery powers a simple analog watch for 12 to 24 months.
Q: What is the difference between AG2 and other AG series batteries?
A: Each AG model has unique diameter and thickness. AG2 cannot replace AG1, AG3, AG4 or AG10 due to size mismatch. Always confirm the battery model before purchase.
Summary
AG2 (LR726 / 396A) is a classic 1.5V alkaline button cell built for miniature low-current electronics. With standardized dimensions and broad cross references, it remains a popular power option for quartz watches and small consumer gadgets. Always match the chemistry and voltage requirement of your device to get reliable performance.