Views: 0 Author: Naccon Power Technology Company Limited Publish Time: 2026-01-22 Origin: Naccon Power Technology Company Limited
(Lithium Iron Phosphate Battery)
Thank you for choosing our LiFePO₄ (Lithium Iron Phosphate) battery. This battery features high safety, long cycle life, stable performance, and environmental friendliness. It is widely used in energy storage systems, electric vehicles, backup power supplies, solar applications, and other power solutions.
Please read this user manual carefully before using the battery to ensure safe operation and optimal performance.
High safety with excellent thermal and chemical stability
Long cycle life (up to thousands of charge–discharge cycles)
Stable voltage output during discharge
Lightweight and high energy efficiency
Low self-discharge rate
Environmentally friendly and free of heavy metals
(Specifications may vary by model)
Nominal Voltage: 3.2V / 12.8V / 25.6V / 48V
Nominal Capacity: Refer to product label
Charge Voltage: According to model specification
Discharge Cut-off Voltage: According to model specification
Operating Temperature:
Charging: 0°C to 45°C
Discharging: -20°C to 60°C
Storage Temperature: -10°C to 35°C
⚠ Warning: Improper use may cause damage, overheating, or reduced battery life.
Do not short-circuit the battery terminals
Do not disassemble, crush, puncture, or modify the battery
Do not expose the battery to fire, water, or corrosive materials
Do not use damaged or swollen batteries
Keep away from children and pets
Use only compatible chargers designed for LiFePO₄ batteries
Use a dedicated LiFePO₄ charger with correct voltage and current
Ensure correct polarity before charging
Charge the battery in a well-ventilated environment
Do not overcharge or exceed the recommended charging voltage
Disconnect the charger once charging is complete
Do not exceed the maximum continuous discharge current
Avoid deep discharge below the cut-off voltage
Stop using the battery immediately if abnormal heat, odor, or noise occurs
Ensure proper load matching with the battery specifications
Store the battery in a cool, dry place away from direct sunlight
Recommended storage SOC (State of Charge): 40%–60%
Recharge the battery every 3–6 months during long-term storage
Avoid storing the battery in fully charged or fully discharged states
Install the battery securely to prevent vibration or impact
Use appropriate cables with sufficient current rating
Ensure tight and reliable terminal connections
Follow correct series and parallel connection rules if applicable
Regularly inspect battery terminals and cables
Keep terminals clean and free of corrosion
Do not attempt internal maintenance or repairs
Replace the battery if performance degrades significantly
| Issue | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Incorrect charger | Use LiFePO₄ charger |
| Reduced capacity | Aging or deep discharge | Recharge fully or replace |
| Battery overheating | Overload or short circuit | Stop use and inspect |
| No output | BMS protection activated | Reset and check load |
Transport in accordance with local regulations for lithium batteries
Avoid strong vibration, impact, or compression
Ensure terminals are properly protected during transport
Do not dispose of the battery with household waste. Please recycle or dispose of the battery according to local environmental regulations.
The manufacturer is not responsible for damage or injury caused by improper use, installation, or failure to follow this manual.